(800) 304-0566
M-F 8-5 Pacific Time

Sitemap Search Our Site

Copper Hoods protected from tarnish and smudges with ProtectaClear

Do you want to Keep the Metal
in your Kitchen Looking Shiny and New?

Stop fingerprints, smudges, tarnish, water spots and more.

Polishing the metal in your kitchen constantly is frustrating. Copper and brass tarnish and get water spots. Stainless Steel gets smudges and fingerprints.



ProtectaClear is a clear, tough, protective coating that is easy to apply but is tough enough to protect all the metal in your kitchen. Food safe when cured. Dries quickly, leaving the metal in your kitchen looking just polished and new. Easy to apply and maintain.

 

OK--finally a couple of decent pictures of my appliances.  I've had them for about two months, and applied ProtectaClear after they were installed.  I had to clean them up before applying the coating, as the installers left horrible hand and finger prints all over them!  I followed the instructions provided, and cleaned them with acetone.  I applied two coats of the product.  It was a little tricky to use, only because of the constant monitoring for runs until it's dry enough.  That being said, I ABSOLUTELY LOVE this product.  My appliances look as new as the day they were installed.  Clean up consists of a paper towel with some warm water.  I can't imagine having any stainless steel items without using ProtectaClear.  
I now have the kitchen I want, without all the constant work and aggravation typically experienced with stainless steel appliances.  It's the best of both worlds!
Thank you!  Theresa M. Palo Cedro, Ca

 

Stop tarnish and oxidation and Enjoy the Beauty.



I wanted to thank you for all your help and guidance in solving my copper sink problem. We have hard water in our area and as soon as we started using the sink, the water left permanent stains, removable only with copper cleaner. So we basically had a beautiful sink that was great to look at, but we couldn't get it wet! I researched and tried a host of different waxes to no avail. I even wrote to the big guys, Krylon and RustOleum but they had no real solution.
The ProtectaClear product really works and the customer service was superior. I felt like you guys were in the gallery cheering me on.
Thanks for all your help.
Feel free to post this letter on your web site- I bet there are bunch of people out there with the same problem. Paul Coller


We now carry MAAS metal cleaners which will bring out the brilliance of the metal before sealing and protecting with ProtectaClear. One advantage to using MAAS cleaners is that they are NOT acid based and do NOT need to be neutralized before sealing with ProtectaClear.



If you prefer to use an acid polish, you will need the EZ-Prep Neutralizer in the Trial Kit below.




A ProtectaClear Trial Kit is a great way to try ProtectaClear on the metal in your kitchen if you want to use an acid based cleaner or polish. Coat 25 square feet of kitchen metal and have enough left over for other metal protection. Includes 4 oz. of Protectaclear (25 sq. ft. coverage), 4 oz. of EZPrep Neutralizer, an Applicator Pad, Nitrile Gloves and Complete Written Instructions.

ProtectaClear will seal and protect metal from tarnish, oxidation, corrosion, salt air and other damaging elements. It's easy to apply. Self-Leveling. ProtectaClear is not a lacquer or a thick plastic coating which can detract from the beauty of the metal. ProtectaClear is very natural looking and will make the metal look like it is just polished.

Check out our Site-map for Lists of Uses, Directions and Products.





Questions? Can't find the information you are looking for?
We are happy to help. Click to chat.

 
 

 Check out our Site-map for Lists of Uses, Directions and Products.