Restore Faded Garage Doors – No Painting Needed!
Bring Back the Beauty of Your Garage or Front Door with Everbrite Coating.
Is your metal garage door chalky, faded, or dull? Don’t repaint—restore it! Everbrite Garage Door Restoration Kits are the easy, affordable way to restore color and luster without damaging your door’s original baked-on finish or wood grain appearance.
​
Why Choose Everbrite Coating?
-
No painting, no mess. Just clean and apply—no rubbing, no buffing.
-
Restores original color and luster—works on all colors, even effective on woodgrain finishes.
-
Protects against sun damage, oxidation, rust, acid rain, and fading.
-
Much longer-lasting than paint and easier to maintain.
-
Safe for all metal and painted surfaces—including rusted patina and copper doors.
Results of Restoration with Everbrite Coating
Will Everbrite Coating Work on My Door? Test It First!
Simple DIY Test:
-
Clean a small spot with dish soap and water using a sponge or a scrub pad.
-
Rinse and look at the area while it’s still wet.
-
If it looks good wet, Everbrite Coating will restore it!
​
If there’s no color left or it has a vinyl wrap, restoration may not be possible.
How to Restore Your Garage Door (Quick Steps)
-
Clean: Use EZPrep and Prep Pads to remove dirt and oxidation.
-
Rinse well: Do not let soap dry on the door.
-
Dry: Let the surface air dry or use a microfiber towel.
-
Apply: Wipe on Everbrite Coating in smooth strokes. Let dry. Apply a second coat for best results and long-term protection.
No tools, no sanding, no painting. Just wipe it on.
What’s in the Everbrite Garage Door Kit?
-
Everbrite Coating
-
EZ Prep Cleaner
-
Prep Pads and Microfiber Towel for Cleaning
-
Applicator
-
Nitrile Gloves
-
Complete Step-by-Step Instructions
Product Options
Size Options:
-
1-Car Garage Door Kit
-
2-Car Garage Door Kit
-
3-Car Garage Door? Add an Everbrite Pint to a 2-Car Kit
Finish Options:
-
Clear Finish – Original shine, rich color
-
Satin Finish – Soft, low-sheen luster
See Everbrite in Action.
Here is a video showing how easy it is to wipe on Everbrite Coating restoring the original color and luster.
Customer Reviews for Garage & Front Doors
I had two two-car powder coated aluminum garage doors that were heavily oxidized and sun damaged. I was concerned that paint would peel if applied to them. I found Everbrite Coating in a Satin finish and decided this was the best solution. Shipping was prompt for my two kits. Everbrite Coating is a great product. ~ Dan C. Teton Village WY
Specialty Finish Garage Doors
Do you have a garage door with a specialty finish like rusted metal or copper? These finishes can be restored and protected from fading, chalk and even tarnish.
Rusted metal garage door that is faded.
Rusted metal garage door restored with Everbrite Coating.
Copper garage door protected with Everbrite Coating.
Restore Faded Front Doors - No Painting Required!
Give Your Home a Fresh First Impression.
​
Is your once-beautiful front door now dull, faded, or chalky? Restore, don’t replace or repaint! Your front door is the focal point of your home. Restore it's beauty the smart way - no sanding, no paint, no fuss. The Everbrite Restoration Kit brings back vibrant color and luster without damaging the original finish. Everbrite Coating is a clear, durable protective coating that revives and protects your front door’s finish for years.
Will Everbrite Coating Work on My Front Door? Do This Quick Test:
-
Clean a small area with dish soap and water.
-
Rinse and look at the spot while it is still wet.
-
If it looks good wet, Everbrite will restore that look and can be maintained indefinitely.
Ready to Buy? It's Easy!
-
Choose Your Kit Size – Based on your door size.
-
Order Online – Fast shipping to your door.
-
Restore in a Day – Most jobs take just 2–3 hours.
-
Enjoy Lasting Results – Shine and protection for years.​
What's In the Everbrite Coating Kit?
-
Everbrite Coating
-
EZPrep Cleaner
-
Prep pads and Microfiber Towel for Cleaning
-
Applicator
-
Nitrile Gloves
-
Complete Step-by-step Instructions
What Makes Everbrite Coating Different?
-
Clear, non-yellowing, UV-stable finish
Protects from salt, sun, rain, rust and oxidation -
Flexible formula won’t crack or peel
-
Blends to itself—mistakes are easy to fix
-
Long-lasting results with minimal maintenance
How to Clean a Chalky, Dull or Oxidized Door (Complete Directions)
Cleaning a chalky garage door, front door, window frames or other painted metal is a relatively straightforward task. Here are step-by-step directions to guide you through the process:
​
-
Gather your supplies: You'll need the following items:
-
A bucket of water
-
Mild detergent - EZPrep, Dawn or Joy dish soap work well
-
Sponge or microfiber cloth, Prep Pad or soft scrubbing pad to remove stains or chalky oxidation. The back of a blue kitchen sponge works well and is not too abrasive.
-
Garden hose for rinsing
-
Soft-bristle brush (optional)
-
Step-Ladder (if necessary)
-
-
Pre-rinse the door to remove all cobwebs, dust and dirt.
-
Mix a small amount of mild detergent, like Dawn or EZPrep, with water in a bucket. Do not apply this solution to the garage door until it is wet. Doing so could create spots that are hard to remove.
-
Clean the garage door panels: Dip the sponge or cloth into the detergent mixture and gently scrub one panel at a time. Start from the top and work your way down, using a scrubbing motion to remove oxidation and chalk. . Rinse the sponge or cloth frequently in the bucket. Do not let the soap solution dry on the door - you may need to rinse the door partway through the cleaning if the door starts to dry.
-
For tough oxidation, use a Prep Pad or a soft scrubbing sponge. Be careful not to use excessive force, as it may scratch or damage the garage door surface. If necessary, repeat the cleaning process until the oxidation is removed.
-
Rinse the door: Once you've cleaned all the panels, rinse the entire door thoroughly with clean water. You can use a garden hose and an optional soft brush to remove the detergent residue and dirt. An alternative to the brush is a microfiber towel.
-
Dry the door: Wipe the garage door dry using a clean, dry cloth or allow it to air dry naturally. This step helps prevent water spots or streaks from forming.
-
If you see that the door is still dull after being cleaned, you can restore it to look new again. Everbrite Coating will restore the color and luster of the metal to look new again. How the door looks when it is clean and wet is how the door will look restored.
-
Apply Everbrite Coating by wiping it on the clean door to make your door look like new.
​
By following these easy step-by-step directions, you can effectively clean your garage door or other metal surfaces and help keep it looking its best for years. Everbrite Coating will also protect the door from fading, chalking, oxidation, rust and will make it easier to keep clean.
How To Improve the Look Of Your Home
Originally, the paint on your garage door was baked on. Some doors have faux wood grain that can be lost if painted. Don't paint your door and lose the original finish. Many of the additives that used to make paint last a long time have been removed from paint due to health and environmental concerns. (Lead is one of the additives that has been removed) Paint that is not baked on tends to fade faster and may even bubble and peel. You can easily restore the color and luster of your garage door by restoring it with Everbrite Coating.
​
Everbrite Coating is a tough, durable clear coating that restores the color and luster of doors and will protect your paint from fading, corrosion, oxidation, acid rain and more.
​
-
Restore the original color and luster of your door.
-
Less mess than painting.
-
Easier and less expensive than painting.
-
Protect the door hardware from rust and oxidation at the same time.
-
Everbrite Coating lasts much longer than repainting.
-
Coated surfaces are much easier to keep clean and repel dirt.
-
Restore painted metal garage doors, rusted patina garage doors and even copper doors.
​
Everbrite Coating is easy to apply. First, clean your garage door. Then, apply the clear coating. NO buffing, NO rubbing. Just apply, let dry and ENJOY the new look of your door.