+1 (916) 852-0200
M-F 8-5 Pacific Time

Sitemap Search Our Site

KEEP YOUR COPPER GARDEN ART LOOKING NEW

You just bought some beautiful copper garden art and love the warm accent in your garden. If it is not protected, the copper will weather. Copper garden art is a beautiful accent to your property. You love the warm glow of the metal. But, how do you keep the copper and brass from tarnishing or weathering? Everbrite Coatings are clear, protective coatings that will keep your copper looking new and will prevent weathering.

Protect Copper Garden Art from Tarnish and Oxidation Protect Copper Garden Art from Tarnish and Oxidation

Check out these DreamSprayer Copper works of art -A Copper Art Sprinkler Revival. They have an amazing collection. You can keep your Copper Sprinkler Art looking New with Everbrite or ProtectaClear Protective Coating. Click Here for a Comparison Chart.

Flamed Copper Art protected with ProtectaClear

Key West Copper Art uses Everbrite Protective Coating to keep their beautiful art looking bright, prevent tarnish and salt corrosion.

EVERBRITE and ProtectaClear Coatings will prevent tarnish and corrosion on brass and copper. Stop tarnish on your copper garden art, copper fountains and more. Stop tarnish and oxidation and Enjoy the Beauty.

EVERBRITE Coatings will seal and protect metal from tarnish, oxidation, corrosion, salt air and other damaging elements. It’s easy to apply. EVERBRITE Coatings are not a lacquer or a thick plastic coating which can detract from the beauty of the metal. Everbrite Coatings are very natural looking and will make the metal look like it is just polished. Want to see Comparison Charts for the Coatings?

DIRECTIONS

1. If you want to protect your metal garden art while it is still new, simply clean any oil or other contaminants from the the copper or brass. This can be done by wiping the metal with xylene or denatured alcohol which can be purchased at most hardware or paint stores. This will insure a completely clean surface so the Everbrite can go on evenly and will have good adhesion. Wiping with the solvents will not remove tarnish. If you want to let the metal tarnish slightly and would like to preserve the tarnish and not have it get any worse, then you can stop the advancement of the tarnish with an Everbrite Coating.

2. Once the metal is clean, Everbrite Coatings can be applied by several methods. It can be sprayed on or wiped on the surface with clear-coat applicators, natural bristled paint brushes, polysponge brushes or a pad of lint-free cloth. Let it dry and enjoy your beautiful copper and brass Garden Art, weathervane, cupola, finial, copper gutters, windchimes and more.

For exterior applicatons which do not get a lot of handling, Everbrite is recommended. For interior metal or metal that gets a lot of handling like railings, door knobs, door knockers, etc, ProtectaClear is recommended.

Copper Garden Art Coated with Everbrite

Everbrite Trial Kit

Everbrite Trial Kit for exterior copper.Clean & Restore about 25-30 Square feet

Other Everbrite Kits with Polishes and Copper Cleaners.

ProtectaClear Trial Kit

ProtectaClear Trial Kit for Interior Metal. Clean & Restore about 25-30 square feet.

Other ProtectaClear Kits with Polishes and Copper Cleaners.

I just wanted to write and say THANK YOU! I have been spraying my copper creations with Protectaclear and they look Fantastic!! Protectaclear is the best clear protectant on the market by far. It dries really fast and there is no streaking or drips or yellowing. It doesn’t chip crack or flake. My customers of Carolina Copper Creations really love it! My shop has very little heat in it and I needed to get a piece finished one night while it was snowing outside, humidity was way high. I thought that I would give it a try and much to my surprise the protectaclear performed just as it did when it was warm outside. It dried in the same amount of time too. Amazing stuff!! Thank you guys so much, you really have a great product. Also thank you for your quick tech support, I have never seen anything like it! Your the best!
Carolina Copper Creations
Joseph Owens

"I create solid copper sculptures for the yard and garden and until I discovered Everbrite last year I was constantly burdened with the problem of the copper tarnishing or oxidizing. This was great for the people that requested that look, but most of my clients liked the shiny new look of the fresh copper. I had tried polishes, waxes, lacquer, and clear enamel but they all failed within months. When I stumbled across the Everbrite website it sounded too good to be true but I figured it was worth a try. Well, a year later I am still amazed with it's ease in application, durability, and longevity."






Questions? Can't find the information you are looking for?
We are happy to help. Click to chat.

 
 

 Check out our Site-map for Lists of Uses, Directions and Products.